SCANTRIC LOGO NETCONTROLS RR-1200
RR1200 Picture RR1200 Radio Router
RR1200 module conects isolated FT-10 LonWorks networks by means of standard narrow band FM radio transceivers. Its applications are wherever it is needed to communicate over high distance at low cost.

Data packets are transmited at 600 bps or 1200 bps, using FSK modulation. RR1200 router can be programmed to work in Repeater, Bridge, Learning or Configured Router operation modes

PTT delay is also programmable, its range goes from 100 ms to 300 ms


BLOCK DIAGRAM Applications
  • Electric, Gas and Water Utilities
  • Factory Automation
  • Intelligent Buildings
Among many others



Terminal Description
No. Function
1 FT-10 Network
2 FT-10 Network
3 Power Supply +V
4 Power Supply GND
5 PTT Output to Radio Transceiver
6 DCD Signal Input from Radio Transceiver
7 Audio Output to Radio Transceiver
8 Audio Input from Radio Transceiver
Technical Specifications
Power Supply 8 - 24 Vdc
Consumption < 100 mA
Number of Channels Two (One FT-10 at 78 kbps
and One 600/1200 bps radio channel)
Modem FSK, Bell 202, 1 Vpp
Dimensions L x W x H: 105 x 90 x 70 mm
Visual indications Three 3 mm leds
(Packet, PTT, A Cnf)
Operation Temperature -10º C to 55º C
Mounting DIN rail


www.atechna.com