SCANTRIC LOGO NETCONTROLS LW-G07
LonWorks Digital I/O and MODBUS Gateway Module
LW-G07 picture NETCONTROLS LW-G07
Digital Input / Digital Output / Gateway module
The LW-G07 module works at once both: as a 7 digital I/O module and as a Protocol Gateway. It is designed to connect LonWorks FT-10 networks to MODBUS based SCADA systems, at the same time It operates as a standard node in a distributed system.

The unit includes a RS-232 port with MODBUS RTU SLAVE protocol. LonWorks Network Variables are mapped into MODBUS, and can be polled by a remote Control Center.

Each of the seven channels is configurable as Input or Output. Inputs are Dry Contact type, outputs are Open Collector.
Block Diagram Applications
  • Electric, Gas and Water Utilities
  • Factory Automation
  • Intelligent Buildings
Among many others



Terminal Description
No. Function No. Function
13 Power Supply +V 25 GND
14 Power Supply GND 26 Digital I/O4
15 FT-10 Network 27 GND
16 FT-10 Network 28 Digital I/O3
    29 GND
    30 Digital I/O2
21 GND 31 GND
22 Digital I/O6 32 Digital I/O1
23 GND 33 GND
24 Digital I/O5 34 Digital I/O0
Technical Specifications
Power Supply 8 - 24 Vdc
Consumption < 80 mA
I/O Channels 7 digital I/O, jumper selectable.
Input Type Dry contact
Output Type Open Collector
LonWorks Communications FT-10 Channel (78 kbps)
MODBUS Communications RS-232, 600 to 4800 bps,
female DB9 connector
(DCD signal required)
Dimensions L x W x H: 105 x 90 x 70 mm
Visual indications Two 3 mm leds (Power and Status)
Operation Temperature -10º C to 55º C
Mounting DIN rail


www.atechna.com